The lubricating system for demolition excavators which are operated with the same tool the most time.

…also with hydraulic drive

Advantages:

• BEKA HAMAX EP consists of a grease pump with steel reservoir (capacity 2 or 4 kg) and a pump element PE-120 V with manometer.
• To protect the pump against vibrations, it is installed directly at the excavator.
• The lub point at the tool is connected to the pump by a high-pressure coupling and a high pressure hose.
• As soon as the hammer is activated, the pump supplies the lub point with chisel paste.
• The output is regulated by an adjustable pump element.

The electronic control unit monitores the lubricant level in the reservoir. If the level is too low, the pump is switched off and a fault message is generated.

A start release relay can be integrated optionally: With start release relay it is not possible to start the machine if the reservoir is empty.

A very important feature especially for rental machines.

Technical data:

Operating temperature: -15°C to +80°C
Outlets: max. 3
Output per outlet: max. 0,12 cm³/Hub
Position of installation: vertical
Drive: Hydraulic motor with worm gear
         speed reduction ratio 150:1
Consumption: min. 6 l/min, max. 17,2 l/min
         (= 1400 – 4000 min-1)
Input pressure: min 30 bar, max. 210 bar
Lubricant: copper chisel paste and all other kinds of grease

North American Head Office:
2830 Argentia Road
Unit 9
Mississauga, ON
L5N 8G4
Canada
Tel: 905-821-1050
      1-888-862-7461
Fax: 905-858-0597
beka-lube.com

US Office:
PO Box 615
2600 North America Drive,
Suite 8
West Seneca, NY
14224
USA
Tel: 1-888-862-7461
Fax: 905-858-0597 
beka-lube.com