The electric pump EP-85 is suitable for the supply of lubricants up to NLGI II. It is actuated by a direct current motor with worm gear.

The pump has 2 lubricant outlets, which can be fitted with each a pump element PE-560 V. The operating pressure is 280 bar.

The lubricant reservoir has a capacity of 85 kg. Therefore the pump is suitable for the lubricant supply of medium sized and large construction machines.

The EP-85 has a steel reservoir with integrated grease level monitoring.

The pump can be controlled by SPS or the machine controller.

Technical data:

Voltage:                                 24 V DC

Power:                                   0,4 kW

Current:                                  23 A

Revolutions:                             9 U/min.

Operating pressure:                   max. 280 bar

Ratio:                                     23:1

Delivery rate per outlet:             max. 5,04 cm3/min.

Reservoir size:                          85 kg

Temperature range:                  -20° C to +40° C

Protective system:                    IP 66

Lubricant:                                Grease up to NLGI II

                                             (without solids)

Technical data:

Delivery rate:    0,10 to 0,56 cm3 / stroke

Adjustment:      0,05 cm3 per notch

Lubricant:          Grease NLGI 00/000
                            up to NLGI II

The EP-85 has  electronic level monitoring.

It is possible to monitor the maximum grease level and the minimum grease level.

It  is also possible to get an advance warning before the minimum grease level is reached.